先说含义:
顾比均线:
是由两组均线构成,
短期均线组为3、5、8、10、12、15日组成,黄绿色组成
长期均线组为:30、35、40、45、50、60日组成,紫蓝色组成,
红钻和蓝钻:代表压力位和支撑位,滞后指标,出现之后,要么上穿,要么下穿,所以不重要,不用管
年线:就是250日线,浅蓝色,意义也不大,
(生命线:绿色,是根据长期回报率画的线,对宽基指数有用,其他没用,不准确,建议单独设置。
无穷成本均线:市场历史上的平均成本,从月线看,单独设置
设置方法:
1、先下载通达信,手机上电脑上都可以,
2、打开软件后随便点开个K线图,比如沪深300
代码如下,记得复制,不要错
E3:EMA(C,3),COLOR61DC16; E5:EMA(C,5),COLOR61DC16; E8:EMA(C,8),COLOR61DC16; E10:EMA(C,10),COLOR61DC16; E12:EMA(C,12),COLOR61DC16; E15:EMA(C,15),COLOR61DC16; E30:EMA(C,30),COLORD1875A; E35:EMA(C,35),COLORD1875A; E40:EMA(C,40),COLORD1875A; E45:EMA(C,45),COLORD1875A; E50:EMA(C,50),COLORD1875A; E60:EMA(C,60),COLORD1875A; IF(E3>REF(E3,1),E3,DRAWNULL),COLORYELLOW; IF(E5>REF(E5,1),E5,DRAWNULL),COLORYELLOW; IF(E8>REF(E8,1),E8,DRAWNULL),COLORYELLOW; IF(E10>REF(E10,1),E10,DRAWNULL),COLORYELLOW; IF(E12>REF(E12,1),E12,DRAWNULL),COLORYELLOW; IF(E15>REF(E15,1),E15,DRAWNULL),COLORYELLOW; IF(E30>REF(E30,1),E30,DRAWNULL),COLORFF00FF; IF(E35>REF(E35,1),E35,DRAWNULL),COLORFF00FF; IF(E40>REF(E40,1),E40,DRAWNULL),COLORFF00FF; IF(E45>REF(E45,1),E45,DRAWNULL),COLORFF00FF; IF(E50>REF(E50,1),E50,DRAWNULL),COLORFF00FF; IF(E60>REF(E60,1),E60,DRAWNULL),COLORFF00FF; STICKLINE(C>O,C,O,1,0),COLORRED; STICKLINE(C>O,H,L,0,0),COLORRED; STICKLINE(C<=O,C,O,1,0),COLORFFFF52; STICKLINE(C<=O,H,L,0,0),COLORFFFF52; DRAWICON(EMA(C,8)>EMA(C,15) AND EMA(C,40)>REF(EMA(C,40),1) AND CROSS(EMA(C,3),EMA(C,35)),L-0.20,24); DRAWICON(EMA(C,15)>EMA(C,40) AND EMA(C,35)>REF(EMA(C,35),1) AND CROSS(EMA(C,3),EMA(C,5)),L-0.20,25); DRAWICON(ABS(EMA(C,15)-EMA(C,60))/C<0.01 AND EMA(C,15)>EMA(C,30) AND O<EMA(C,3) AND C>EMA(C,3) AND O<EMA(C,15) AND C>EMA(C,15) AND O<EMA(C,30) AND C>EMA(C,30) AND O<EMA(C,60) AND C>EMA(C,60),L-0.20,27); DRAWICON(ABS(EMA(C,45)-EMA(C,30))/C<0.011 AND EMA(C,3)>EMA(C,15) AND EMA(C,15)>EMA(C,40) AND CROSS(EMA(C,5),EMA(C,60)),L-0.20,13); A1:=OPEN<EMA(C,20) OR OPEN<EMA(C,40) OR OPEN<EMA(C,60); A2:=C>MAX(EMA(C,20),MAX(EMA(C,40),EMA(C,60))); A3:=V/MA(V,10)>1.2; A4:=C/REF(C,1)>1.049; 北龙湖巴菲特:=A1 AND A2 AND A3 AND A4 AND O<EMA(C,60) AND C>EMA(C,60); DRAWICON(北龙湖巴菲特,L-0.20,9);MA4:MA(CLOSE,M1),LINETHICK3;
JJJ:=IF(DYNAINFO(8)>0.01,0.01*DYNAINFO(10)/DYNAINFO(8),DYNAINFO(3));
DDD:=(DYNAINFO(5)<0.01 || DYNAINFO(6)<0.01);
JJJT:=IF(DDD,1,(JJJ<(DYNAINFO(5) 0.01) && JJJ>(DYNAINFO(6)-0.01)));
CYC∞:IF(JJJT,DMA(AMOUNT/(100*VOL),100*VOL/FINANCE(7)),EMA((HIGH LOW CLOSE)/3,120)),LINETHICK2;